Productions AcmeLight

Forms resistant to abrasion, water, and brine Floor, glowing in the dark. The appearance of the paint film - rough, uniform, matte surface. Hiding power of the film, g / m2 - not more than 187.5. Drying time at 18-22 ° C, 3 rd degree, a wet film thickness of 100-150 microns, at most, 25 minutes. Mass fraction of solids,%, not less than 71.5. Film resistance to static action of water at the temperature of 18-22 ° C, h, not less than 72. Resistance to static effects of the 3% NaCl solution at a temperature of 18-22 ° C, h, not less than 72. Density at 18-22 ° C, g / cm 3, not less than 1.49. Flow (covering 600-700 microns wet), g / m 2 - 500-700. Wear coefficient - 0.62.

6-8 hours.

Surface has to be clean of dust, grease, industrial oils and other contaminants. Paint is stirred until smooth and applied by conventional spray, brush, roller or special mechanized method on a dry surface at temperatures from 5 to 35 ° C and a relative humidity of 80%. Mechanical means after using the rinse mixture of toluene and acetone (in a ratio of 1: 1), or a mixture of gasoline and acetone in the same ratio. When applied by conventional spray paint was diluted to a viscosity of a mixture of toluene (solvent or 646) with acetone in the ratio of 1: 1 in an amount of not more than 15% of the total weight.

The suspension of the phosphor pigments and fillers in a solution of acrylic resin with the addition of the solvent and functional additives.

Store in the original sealed packaging, in dry conditions at a temperature of not more than 30 ° C, out of children. Keep away from direct sunlight, moisture and heat.

0.5L, 1L, 5L

18 months from date of manufacture in the original sealed package.