Productions AcmeLight

For what do you need to illuminate an object, if it can glow on its own? It is enough to cover it by the thick glowing layer. Paint Acmelight Metal is specially designed for metal. Such kind of paints does not only shine, but also it protects metal surfaces. Auto-tuning, design of buildings and premises, fencing and signs – all of these can glow in the night without lanterns and lamps, without accumulators and batteries.

Acmelight Metal creates the colorful covering, which glow in the dark by light blue or green color, with increased strength and weather resistance, resistant to the action of detergents, oils, as well as to some organic solvents. Paint has a high level of drying.

Application:
Paint is applied for painting of metal surfaces inside and outside buildings. The application field of this paint is quite wide: auto-tuning, airbrushing, painting of car rims, exterior and interior decor design. By the way, it is possible to make glowing car numbers! AcmeLight Metal is applied on any metal surfaces.

Application method:
The paint is applied by the brush, roller or by immersion in 1-3 thin layers. Applying it with the air-brush, the air sprayer nozzle 1,4 – 1,5 mm, pressure- 3-4 bar, it is recommended to apply as the second (intermediate) layer = 15 – 22 µm; Apply hardeners, containing xylene in ratio 2:1. The drying period under the temperature +20 and relative humidity 50% up to 4 hours.

Consumption:
1 layer per 10-12 sq.m.

Attention!
The paint contains additives, which settle to the bottom of the can. Before application the paints should be thoroughly mixed for 2-5 min till the homogeneous mass. During application it is necessary to mix it regular

Storage and precautions:
Store and transport the paint in hermetically closed containers, under the temperature from 0 up to 30°С out of childrens reach. Keep away from ignition sources and from direct sunlight, heating devices and moisture. During the painting works, the building should be well ventilated. Use rubber gloves for protection of your hands. Use a respirator for respiratory protection, apply spraying method. The empty containers should be recycled. The working tools should be washed in solvent.

Glowing period:
6-8 hours after charging

Quick drying:
Under the temperature +20°С, and the relative humidity 50% - up to 4 hours

The surface preparation:
The surface should be cleaned of old loose and opaque coverings, dust and dirt should be removed.

Packing:
metal can 0,5 l., 1 l.

Composition:
On a basis of high-quality 2k acrylic resin with functional additives, xylene, mixture of sterically composed salts.

Shelf-life:
18 months from the production date.

Order!