Productions AcmeLight

If you would like to speak about the universality of the product, then Acmelight Facade deserve applause in this sense. Decoration of walls and gypsum ceilings, wallpaper and plaster. Surfaces, processed by such paint, due to the content of specific additives in it, are protected from mold and mildew. And the effect of warm blue – light blue glowing in the building, coming from, for example, walls or celling can be compared with nothing similar.

Acmelight Facade – acrylic paint, specially designed for decorative and protective painting of inside building walls, ceilings, wallpapers and etc. It is a line of fast-drying paints. It has a good mechanical and chemical resistance, fast-drying, high elasticity. Due to special additives, the paint prevents the appearance of fungus and mildew on painted surfaces. The paint is completely ready for use.

Acmelight Facade is designed for decorative painting of walls and ceilings inside and outside the premises, produced from different materials: cement-lime plasters, plasterboard, bricks, concrete, wallpaper and other porous materials. It is used in interior design.

Application method:
Paint is applied by the brush, sprayer or dipping. The drying period under the temperature +20°С and the relative humidity 50% is up to 2 hours.

10-13 sq.m.\1 l.

The paint contains additives, which settle to the bottom of the can. Before application the paints should be thoroughly mixed for 2-5 min till the homogeneous mass. During application it is necessary to mix it regular.

Storage and precautions:
Store and transport the paint in hermetically closed containers, under the temperature from 0 up to 30°С out of childrens reach. Keep away from ignition sources and from direct sunlight, heating devices and moisture. During the painting works, the building should be well ventilated. Use rubber gloves for protection of your hands. Use a respirator for respiratory protection, applying spray method. The empty containers should be recycled. The working tools should be washed in solvent.

Glowing period:
6-8 hours after charging

Fast drying:
Under the temperature +20°С and the relative humidity 50% - up to 4 hours.

The surface preparation:
The surface should be cleaned of old loose and opaque coverings, dust and dirt should be removed.

metal can 0,5 l., 1 l.

On a basis of high-qualified 2k acrylic resin with functional additives, xylene, mixture of sterically composed salts.

18 months from the production date.